Skip to content
1/30/24 - Site under construction. If you need a build sheet on a specific van, email us. Ford Mini Kits are back in stock, lowered price. We also updated the Ford Gen 4 Ford kit and will be adding Gen 3 info next day or so.
1/30/24 - Site under construction. If you need a build sheet on a specific van, email us. Ford Mini Kits are back in stock, lowered price. We also updated the Ford Gen 4 Ford kit and will be adding Gen 3 info next day or so.

Ford Econoline Transmission Drop Brackets

$99.00
Transmission
Drill Bit
Description:

Whether you use leaf springs or lift blocks to raise the rear of your van, you will need to consider the change in the driveline angle coming off the back of the transfer case. Failure to lower the cross member in vans with more than 3" of lift generally results in driveline feedback at higher speeds. 

Our crossmember drops are an easy solution to lower your transmission cross-member the correct amount for 4-6 inches of lift at the rear axle. This kit works with E40D, 4R100, 4R75, and 5R110 transmissions. 

Our bolt-in solution requires drilling 2 holes in the crossmember. No welding is required, though you could certainly weld them in if you wanted to. Our 6r140 drops do require welding in. 

Our plates come labeled driver and passenger with clear instructions to install. Add a 9/16" drill bit to make the work go quick. (Most jobber bit sets only go up to 1/2" so check if you need one.)

Note: If converting your E40D or 4R100 to 4x4, you will need to drill 2 more holes in the lower section of your crossmember because the spacing on the transmission mount 2WD vs. 4x4 is slightly different.  

Fitment Designed for: 

Van Side - 1989-2023 Ford E-150, E-250, E-350, E-450 

Tools Required:

Hand or Pneumatic tools

Construction Notes:

Powdercoated 1/4" A36 steel, Zinc coated grade 8/10 hardware.

Tips / Skill Level:

1-10 (10 being most difficult) Level 1, welding required on 6r140 option.

This product may work with other model vehicles. 

Install transmission cross member, torque upper 19mm nuts to 60 ft-lbs, and mount nuts to 66 ft-lbs

Shipping, Fulfillment, Taxes, Quality, and Returns
  • Shipping: Our components are carefully wrapped & packaged and shipped via UPS, USPS, or FedEx, depending on what is available. If you require a particular carrier, please contact us ahead of your purchase.  Customers in Colorado may arrange for in-person pickup within 1-2 business days of purchase. 
  • Shipping/Fulfillment time for components: We typically ship within 1-2 business days of your order and we carefully monitor our inventory. In the event that we are unable to meet that timeframe, we will contact you and arrange either a full refund or a timeframe for fulfillment agreeable to the customer. 
  • Taxes: Colorado residents must pay a sales tax of 7.5%, no sales tax is collected on out-of-state shipments currently. 
  • Quality and Returns:  We are consistently complimented on the quality of our products and the ease of installation. Fabricated components are generally hand-built here in Colorado by seasoned professionals. Replacement or aftermarket parts are only offered in high-grade options.

    If you are in any way disappointed in the components, we will issue a full refund less the cost of shipping when the product is returned within 30 days of receipt. If you decide to return any components that didn't apply to your build or you changed your mind about, a shipping +15 % restocking fee will be deducted from the refund.