Skip to content
5/30/24 - New/Updated: Hi-clearance Ford SB links, 6.0 Oil Filter Re-clock,4L80&4L60 Shifters, Ford Rear Brake Lines Extensions, Superbeef Rear Lift Blocks, updated billet 6L90 4x4 adapters, adding manuals to products, many more to go.
5/30/24 - New/Updated: Hi-clearance Ford SB links, 6.0 Oil Filter Re-clock,4L80&4L60 Shifters, Ford Rear Brake Lines Extensions, Superbeef Rear Lift Blocks, updated billet 6L90 4x4 adapters, adding manuals to products, many more to go.

Easy-Wire Transfer Case Range LED Indicator Kit

Sold out
$115.00
Transfer Case Model
Description:

Take the head-scratching out of wiring up the indicator for your transfer case. This is our Easy-Wire kit that cuts way down on time to wire up your 4x4 indicator lamp for your custom application.

Our harness is thoughtfully designed and comes with 12 feet of loomed 14 gauge wire to send the signal from your t-case to illuminate your LED on the dash. Kits come with a new OE sensor, mounting zip ties, hardware, and waterproof connectors. The system breaks down into pieces to make service + installation easy.

This simple design only indicates whether the vehicle is in 4x4 and does not distinguish between high and low. (will light up in both high/low)

Application Notes README:

Red wire for the jumper fuse is 3.5 feet long. If you need a longer wire to get to your fuse panel, please email us with the length required.

If you're working on a specific project, please email with info when purchasing.

Some 231 transfer cases used a range sensor similar to the 261. If you are working on a 231/241 please verify what your sensor looks like prior to ordering.

Installation: (More detailed instructions included)

-Disconnect the sensor from our harness, install it in your t-case, attach a ground wire to the frame, run the signal wire to your dash, locate an accessory fuse and pop the connector in. Drill a 15/32" or 1/2" hole in the dash, connect everything up and off you go. 

Fitment Designed for: 

E-Series 4x4 Van Kit - 1992-2014 Ford E-150/250/350/450 Vans with NP/NV271 Transfer Case

General design for anything with 231, 241, 261, 271, or BW1356 transfer case. Will work with other cases. 

Tools Required:

Standard hand tools, Drill gun w/ 15/32" or 1/2" bit. 

Included:

New OEM Sensor, waterproof connector, 14 gauge wiring, high-quality LED indicator, fuse jumper, standard zip ties, screw-hole zip ties, HD self tapper for frame and smaller self tappers for zip ties.

Construction Notes:

Tips / Skill Level:

1-10 (10 being most difficult) Level 2 - Basic wiring principles required. 

This product may work with other model vehicles.

Shipping, Fulfillment, Taxes, Quality, and Returns
  • Shipping: Our components are carefully wrapped & packaged and shipped via UPS, USPS, or FedEx, depending on what is available. If you require a particular carrier, please contact us ahead of your purchase.  Customers in Colorado may arrange for in-person pickup within 1-2 business days of purchase. 
  • Shipping/Fulfillment time for components: We typically ship within 1-2 business days of your order and we carefully monitor our inventory. In the event that we are unable to meet that timeframe, we will contact you and arrange either a full refund or a timeframe for fulfillment agreeable to the customer. 
  • Taxes: Colorado residents must pay a sales tax of 7.5%, no sales tax is collected on out-of-state shipments currently. 
  • Quality and Returns:  We are consistently complimented on the quality of our products and the ease of installation. Fabricated components are generally hand-built here in Colorado by seasoned professionals. Replacement or aftermarket parts are only offered in high-grade options.

    If you are in any way disappointed in the components, we will issue a full refund less the cost of shipping when the product is returned within 30 days of receipt. If you decide to return any components that didn't apply to your build or you changed your mind about, a shipping+15% restocking fee will be deducted from the refund.