Products

Description This is a universal bolt-up manual transfer case shifter for the 4L60/4L65 transmission found in GM trucks and vans from 1992-2013. The...

Description: This is a straightforward bolt-on solution for converting your 4L80 transmission to 4x4, without the need to cut the output shaft. To ...

Description: This is a GM performance or ACDelco OE Aluminum 4x4 extension housing compatible with 1999-2007 Silverado 2500 + 3500 vehicles & S...

Description This is a universal bolt-up manual transfer case shifter for the 4L80 transmission found in GM trucks and vans. The kit is optimized fo...

Description This is a bolt-up manual transfer case shifter for the 6L80 transmission found in many GM pickups and vans. Our shifter is designed to...

Description: This is our updated high-performance adapter setup for converting the 2 wheel drive 6L90 to 4x4 without cutting anything. Our beautifu...

Description: This is the component kit required to convert a 2-wheel drive 8L90 transmission to 4x4. This conversion can be performed in-vehicle wi...

Description: This is a straightforward bolt-on solution for converting your 2-wheel drive E40D or 4R100 transmission to 4x4 without the need to cut...

Description: Our E-series Driveshaft and Transfer Case hardware kit for your 4x4 Ford van conversion is a quick solution for hardware needs when bu...

Description: Whether you use leaf springs or lift blocks to raise the rear of your van, you will need to consider the change in the driveline angle...

Description: This torsion bar carriage and transmission/t-case cross-member is designed for use in 2500 + 3500 series Chevy Express and GMC Savana ...

Description: The NP261 was built by New Process (New Venture) and is a reliable chain-driven transfer case used primarily in Chevrolet and GMC veh...

Description: This is our transfer case shifter kit most commonly used on Ford E-series 4x4 conversions with the NP271 / NV271 transfer case. The d...