Products

Description This is a universal bolt-up manual transfer case shifter for the 4L60/4L65 transmission found in GM trucks and vans from 1992-2013. The...

Description This is a universal bolt-up manual transfer case shifter for the 4L80 transmission found in GM trucks and vans. The kit is optimized fo...

Description: Lift block options for heavy rigs are just very limited when you start looking at 5" or more and we really wanted to provide a perman...

Description This is a bolt-up manual transfer case shifter for the 6L80 transmission found in many GM pickups and vans. Our shifter is designed to...

Description: This is our updated high-performance adapter setup for converting the 2 wheel drive 6L90 to 4x4 without cutting anything. Our beautifu...

Description: Variations of the 8.25" front AAM carrier have been used in full size GMC vehicles since 1988. These are common in 1/2 ton Silverados...

Description: This is the component kit required to convert a 2-wheel drive 8L90 transmission to 4x4. This conversion can be performed in-vehicle wi...

Description: The AAM 9.25 IFS axle was used in GM K-series trucks from 1988-2010. It features a lightweight cast aluminum housing and has 33 splin...

Description: This is a very basic no-frills Superduty stabilizer setup that works for vans and trucks alike. The simple bolt-up design takes minut...

Description: The Easy-wire GM 4x4 hub lock + indicator kit is a stand-alone wiring system designed to activate the front hub lock motor and LED ind...

Description: This high performance 4x4 conversion kit is based around a modified version of our Core Kit but specifically tuned for heavy RV vans ...

Description: Our Ford E-series 4x4 rear lift kit is the most affordable and direct way to get the rear of your van lifted to match the front. Whee...

Description: Our Ford E-series dual rear wheel adapters take the guesswork out of converting your Econoline rear wheel pattern to match a Superduty...

Description: Our E-series Driveshaft and Transfer Case hardware kit for your 4x4 Ford van conversion is a quick solution for hardware needs when bu...

Description: The E-series Ford bump stop drop kit offers a straightforward and speedy solution for lowering your van's original bump stops. These w...

Description: The Timberline Ford E-series core 4x4 conversion kit streamlines the van conversion process by providing most non-standard components...

Description: These Ford Econoline front brake lines are direct replacements for the soft lines that run between the coil bucket and the brake calip...

Description: When lifting the rear of your E-series van you can generally kind of bend down the brake line bracket that secures the lines at the fr...

Description: When converting your E-series van to 4-wheel-drive with a Superduty front axle, you'll find the wheel speed sensors on the hubs have a...

Description: This is our standard front sway bar and sway bar link mounting kit for the Ford Econoline to Superduty front axle setup. It is the str...

Description: Whether you use leaf springs or lift blocks to raise the rear of your van, you will need to consider the change in the driveline angle...

Please visit our FAQ and Build pages if you have not already. They genuinely have good information that will aid your decision making and project ...

Description: This is our Hi-Lift drop carriage and skid plate system for GM 2500, 3500 & 4500 series vans, years 2003-current. This setup lower...

Description: These are our GM Hi-Lift Knuckles for Chevy Express and GMC Savana full-size vans. These knuckles are several inches taller than the c...